|
Stainless Steel Posts and fittings come in two qualities. 304 Grade stainless steel is suitable for most ordinary internal and external uses, and 316 Marine Grade is recommended for outside areas within 5 miles of the sea or around swimming pools.
The stainless steel posts and rails are available in either a 42.4mm diameter or 48.3mm. The 42.4mm diameter posts are most suitable for balustrading with a total length under 15 metres. Larger decks should use posts and rails with a 48.3mm diameter. This is recommended both for strength and appearance.
Our WINDSOR Solid Glass Balustrades are available with either a Stainless Steel or hardwood handrail. Windsor balustrades are easy to assemble.
For decks over 600mm from the ground, consult a structural engineer or your local building inspector.
Assembly Instructions for Windsor Glass Balustrades
1. The posts and handrail will be supplied to you pre-drilled. It is therefore necessary to tell us
a) The width of the glass that you require for each section. The width of glass is 4cm less that the distance between the posts. (This allows a 2cm gap between the glass and the post. This gap is required for the glass clamp.)
b) The height of the glass you require for each section. We need to know both the height you require and the distance of the glass from the deck. (This is required so that we can drill the hole in the posts for the clamps, such that if the glass were to slip, it would be supported by the top clamp.)
c) The overall height of the Balustrade. (This will allow us to cut the stainless steel posts to the correct height).
d) The width between the CENTRES of the posts for each section.
e) A sketch of the whole Balustrade. We are unable to supply fittings for glass that over hangs the decking.
Ordering Glass and Stainless Steel Posts
PLEASE EITHER FAX THIS INFORMATION on 01628 522 541 or EMAIL on htfenceanddecking@btconnect.com or TEL on 01628 526995 as well as your stainless steel requirements. This will allow us to quote a price to you, either for the stainless steel alone, or for both the glass and the stainless steel.
2. The glass and the Stainless Steel Posts and Fittings will arrive separately. You should allow around 3 weeks for the receipt of the glass as it is cut to your size and then tempered.
3. When glass and stainless steel has arrived, first erect the Stainless Steel Posts.
4. Remove the lugs from the glass clamps. These lugs are not required unless the glass over hangs the decking. In the event of the glass slipping, it will only slip to the deck level.
5. Assemble the glass and Glass Clamps.
6. Glue and/or screw the rail and supports to the posts.
Stainless Steel Posts and Handrail Units for WINDSOR balustrade
Unit Price inc. VAT.
|
Satin Stainless Steel Upright Post welded onto base plate 120mm diameter.
Diameter 42.4mm, Height 1000mm. Drilled for glass clamps.
304 Grade
42.4mm - £96.14 inc. VAT
48.3mm - £103.79 inc. VAT
316 Marine Grade
42.4mm - £120.18 inc. VAT
48.3mm - £124.55 inc. VAT |
Satin Stainless Steel Cover Plate over Base Plate. Diameter 120mm.
304 Grade -
£10.38 inc. VAT
316 Marine Grade -
£13.44 inc. VAT
|
|
Satin Stainless Steel Glass Clamps.
Available for 8 and 10mm glass with rounded backs. Posts predrilled for these clamps.
304 Grade -
£16.45 inc. VAT
316 Marine Grade -
£18.09 inc. VAT |
Satin Stainless Steel End Cap.
Diameter 42.4mm.
304 Grade -
£7.65 inc. VAT
316 Marine Grade -
£7.65 inc. VAT |
|
Satin Stainless Right Angle Elbow. Diameter 42.2mm. To turn a stainless steel rail through a 90 degree angle.
304 Grade -
£22.40 inc. VAT
316 Marine Grade -
£28.96 inc. VAT |
Satin Stainless Steel Tube. Diameter 42.44mm. Standard length 6000mm. Free cut to length.
304 Grade -
£30.15 inc. VAT per metre
316 Marine Grade -
£52.34 inc. VAT per metre |
|
Satin Stainless Steel Corner Saddle Stem. For use with Iroko Hardwood Handrail (below).
304 Grade -
£15.30 inc. VAT
316 Marine Grade -
£16.39 inc. VAT |
Satin Stainless Steel Straight Saddle Stem. For use with Iroko Hardwood Handrail (below).
304 Grade -
£15.30 inc. VAT
316 Marine Grade -
£16.39 inc. VAT |
|
Iroko Hardwood Handrail with 4 alternative ends.
a) Dowelled and pegged for connecting to another handrail.
b) Flat end to fit into stainless steel wall socket.
c) Dome End.
d) Mitred at 45 degrees to right angle.
Diameter 42.4mm. Length 1800mm.
£58.75 inc. VAT |
Universal Fitting for attaching stainless steel rails to post.
304 Grade -
£9.83 inc. VAT
316 Marine Grade -
£13.33 inc. VAT |
|
Satin Stainless Steel Tube Connector. Diameter 42.2mm.
304 Grade -
£9.83 inc. VAT
316 Marine Grade -
£12.13 inc. VAT |
Satin Stainless Steel Elbow. Diameter 42.4mm. For finishing a stainless steel rail at the post.
304 Grade -
£19.12 inc. VAT
316 Marine Grade -
£24.59 inc. VAT |
|
Satin Stainless Steel Wall Socket.
Diameter 42.2mm.
304 Grade -
£18.03 inc. VAT
316 Marine Grade -
£20.76 inc. VAT |
Tube of glue for Stainless Steel
£14.10 inc. VAT |
| . |
Stainless Steel Cleaner
£21.15 inc. VAT | | 
